The molded chair concept was originally created as a prototype for MoMA's International Competition for Low-Cost Furniture Design and introduced in 1948. The design was the result of years of experimentation with molded forms as a potential medium in mass-market furniture construction. The organic shapes the medium could produce were something fresh and new, were well suited to form-fitting comfort and could be made affordable. The original "shell chairs" (which included the Molded Fiberglass Wire-Base Armchair aka DFAR) became 20th century icons, whose popularity has only grown well into the 21st century.
Inmod's Molded Fiberglass Arm Chair is an accurate reproduction that stays true to the original shell chair designs and to their styling, quality and specifications. It is stocked in its most popular configurations and can be ordered in your choice of fiberglass color, base color and seat finish (matte or glossy). Each detail that made the original Molded Fiberglass Wire-Base Armchair special has been carefully preserved to ensure an authentic look and quality.
The Molded Fiberglass Side Chair with Wood Legs (DFSW) takes customizable mid-century design to new heights. In addition to our handpicked stocked models (black or white seat in your choice of glossy or matte finish atop an wood dowel base with FSC-Certified solid wood legs), this modern reproduction can be built exactly how you envision. Select any combination of fiberglass color, seat & wood finish and steel wires to create a classic that is uniquely you. Based on one of the most popular chair designs in modern history (known as the "Molded Fiberglass Dowel-Leg Side Chair" or "DFSW", the Molded Fiberglass Side Chair with Wood Legs is a highly accurate replica built to stand the test of time, that will meet the demands of heavy use in a residential or commercial space. Whether you choose from our stocked inventory or design it yourself, the Molded Fiberglass Side Chair with Wood Legs is every bit as practical as it is stylish.
The Molded Plastic Eiffel Side Chair with Wood Legs faithfully recreates one of the most iconic designs of mid-20th century. Inspired by a modern classic that has continued to successfully gain popularity since its birth in the 1950's (commonly referred to as the "Molded Plastic Dowel-Leg Side Chair", "DSW" & "Shell Chair"), our accurate reproduction is stocked in an array of handpicked colors to suit any space. Sturdy and lightweight, the Molded Plastic Eiffel Side Chair with Wood Legs is a perfect choice for your dining room, establishment or home office (as a stylish & fun desk chair).
In 1948 debuted a molded chair concept at MoMA's International Competition for Low-Cost Furniture Design. The result of much experimentation with molded forms for years, its capabilities offered fresh new design and great value. The organic shapes the medium allowed for were well-suited for mass-production, could be made affordably and could offer form-fitting comfort. The Molded Fiberglass Dowel-Leg Armchair (DFAW) became an instant hit and an icon of the 20th and 21st centuries.
Inmod's Molded Fiberglass Arm Chair with Wood Legs is a premium reproduction that accurately reflects the original design, as well as the quality, styling and specifications. It is stocked in the most popular configurations and can be ordered in your choice of fiberglass color, base color and seat finish (matte or glossy). Each detail that made the original iconic has been preserved, with no expense spared.
The Molded Fiberglass Side Chair is a faithful reproduction of one of the most iconic chairs ever designed. Based on the popular mid-century mainstay, conceived by husband and wife team, Charles & Ray in the 1950s (commonly referred to as the "Molded Fiberglass Wire-Base Side Chair" or "DFSR", our accurate replica preserves the revolutionary styling, durability and versatile character of the original and offers an unparalleled array of color options. Choose from stocked white or black (in either glossy or matte finish) or completely customize it by choosing frame color, seat color and seat finish. The Molded Fiberglass Side Chair is built to last and is sure to bring an air of mid-century sensibility into your home, office or establishment.
Conceived originally as simple and functional yet beautiful modern design to serve the needs of everyone and every place, the Molded Plastic Eiffel Side Chair was originally molded from fiberglass, and manufactured later on from plastic. It has become a 20th century icon and has embedded itself into the design culture of the 21st century.
Inmod's Molded Plastic Eiffel Side Chair is an inspired reproduction that accurately replicates the molded form of the seat, the proportions of the eiffel-style wireframe base and sturdy yet lightweight sensibility of the original. Like the original, the Molded Plastic Eiffel Side Chair is constructed of fully recyclable polypropylene and a highly durable steel wire-base frame finished in chrome. Available with iconic-styled soft matte white and black seats, the Molded Plastic Eiffel Side Chair pays homage without compromising on quality, and offers a TRULY unbeatable value to everyone and every place.
The Molded Plastic Rocker is a stylish reproduction that accurately preserves the character and beauty of the modern classic Molded Plastic Rocker (aka RAR) and replicates each proportion, finish and detail skillfully and with acute attention to detail and quality. The molded shell chair concept was introduced at the International Competition for Low-Cost Furniture at the MoMA in 1948. This iconic design allowed for the creation of organic shapes that were fresh and new in the world of furniture, and these designs could be mass-produced, ultimately fulfilling their desire to make quality modern design affordable.
The Molded Plastic Rocker (RAR) was adapted from an earlier version that was constructed of fiberglass. The fiberglass rocker was in fact adapted from a stationary armchair that was introduced as part of the original shell chair collection which debuted at the MoMA. The addition of the rocker base and the recognition it received is a true testament as to how versatile the shell concept was and still is. One of the most distinguished rocking chair designs of the last 100 years, and without a doubt, one of the greatest contributions to mid-century modern design. Now more stylishly relevant than ever, this iconic design has become a mainstay in modern spaces both in the home and in public venues.
Inmod's Molded Plastic Rocker faithfully captures the style and quality of the original, and offers several options. It is constructed of fully-recyclable polypropylene, and has a chromed steel wire-base with solid ash wood legs. Its softly matted seat is available in both white and black.
Legendary husband and wife design team Charles & Ray believed that functional modern design should be available to the masses. They also believed that their role as designers were that of grateful hosts catering to the needs of their guests. Having experimented with molded forms for years, Charles & Ray were keenly aware that the organic shapes achievable offered something new in the furniture industry. Not only could they be mass-produced, but the forms themselves offered something entirely new in design and function. Originally molded from fiberglass, and plastic later, Charles & Ray's Molded Plastic Dowel-Leg Armchair (aka DAW and "shell chair") became a 20th century icon and has embedded itself into the design culture of the 21st century.
Inmod's Molded Armchair with Wood Legs is an accurately interpreted replica that emulates the molded form of the seat, styling & proportioning of its wood & steel wire base down to each intentionally created detail. Like the original, the Molded Plastic Armchair with Wood Legs is constructed of fully recyclable polypropylene. Its authentically styled base is constructed of black powder-coated steel wire and solid beech wood legs. No expense has been spared in creating a quality reproduction you can be proud of and cherish for many years.
The Molded Plastic Side Chair concept was conceived in the mid-1950's, has received numerous design awards, and has increased in popularity and relevancy ever since. It has served as a functional, versatile choice in homes and establishments throughout the entire world, due to its uncanny blend of form-fitting structure and eye-catching design. Its visual simplicity lends itself so well to experimentation, and for decades, the Molded Plastic Side Chair design has gone through many iterations, with variations in construction materials, color combinations and leg styles.
Celebrating the creative intent of the Molded Plastic Side Chair, Inmod's exclusive Printed Walnut version offers this classic design in a brand-new finish that beautifully replicates the look of a finely detailed walnut wood grain, offering a new layer of appeal that is as sleek and relevant as it is classic and mid-century.